3M MALAYSIA SDN BHD ============================================================================ KIT Chemical Safety Data Sheet ============================================================================ Document id : 08-8288-6 Issue date : 30/05/2006 Version : 2.00 Supersedes date : 09/11/2004 Document status : Issued This CSDS has been prepared by Toxicology Department 3M Malaysia Sdn. Bhd. ---------------------------------------------------------------------------- 1 SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION ---------------------------------------------------------------------------- NOTE ** NOT HAZARDOUS FOR TRANSPORT FOR DOT, IMO, OR IATA. Tradename SCOTCH-WELD(TM) STRUCTUAL PLASTIC ADHESIVE DP-8005 3M Product ID: 62-2786-3630-3 - 500 ml duo pak, 62-2786-0430-1 - 35 ml duo-Pak, 62-2786-0435-0 - 35 ml. duo-pak (sample), 62-2786-3930-7 - 250 ml duo-pack KIT COMPONENTS The information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. Any use of the product which is not in conformance with this data sheet or which involves using the product in combination with any other product or any other process is the responsibility of the user. 3M MALAYSIA SDN BHD ======================================================================== CHEMICAL SAFETY DATA SHEET ======================================================================== Document id : 08-8284-5 Issue date : 30/05/2006 Version : 2.00 Supersedes date : 09/11/2004 Document status : Issued This CSDS has been prepared by Toxicology Department 3M Malaysia Sdn. Bhd. ------------------------------------------------------------------------ SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION ------------------------------------------------------------------------ Tradename SCOTCH-WELD(TM) STRUCTURAL PLASTIC ADHESIVE DP-8005 (PART A) 3M Product ID: 62-2886-7530-9, 62-2886-8530-8 Intended Use of Product COMPANY IDENTIFICATION ---------------------- Manufacturer's name and address 3M 3M Center St. Paul, Minnesota 55144-1000 USA Importer's name and address 3M Malaysia Sdn. Bhd. Bangunan 3M No. 6, Persiaran Tropicana 47410 Petaling Jaya Selangor Telephone number 03-7806-2888 Emergency telephone number 1-651-7376501 ( 24 hours ) CONTACT POINT ------------- Designation Toxicology Coordinator Telephone number 03-7806-2888 ------------------------------------------------------------------------ SECTION 2: COMPOSITION/INFORMATION ON INGREDIENT ------------------------------------------------------------------------ Ingredient name CAS number Percentage ------------------------------------- ------------------ ------------- polyester adipate Trade Secret 40 - 70 POLYFUNCTIONAL AZIRIDINE 64265-57-2 10 - 30 amine borane 223674-50-8 10 - 30 AMORPHOUS SILICA 7631-86-9 < 2 ------------------------------------------------------------------------ SECTION 3: PHYSICAL AND CHEMICAL PROPERTIES ------------------------------------------------------------------------ Physical form,Color,Odor Liquid mild odor, white Paste Water Solubility <<< Boiling point/boiling range >= 35 C Melting point/melting range N/A Vapour pressure <= 0.1 mmHg Percent Volatile = 6.15 % by wt ASTM CONDITIONS: D2369 @110 C Evaporation rate NOT DETERMINED Vapour density NOT DETERMINED Specific gravity = 1.063 Flash point = 82.22 C Setaflash SPECIFIC METHOD: ASTM D-3278-96 Autoflammability NOT DETERMINED Flammable Limits - LEL NOT DETERMINED Flammable Limits - UEL NOT DETERMINED Viscosity = 49000 centipoise ------------------------------------------------------------------------ SECTION 4: HAZARD IDENTIFICATION ------------------------------------------------------------------------ Risk Phrases None ------------------------------------------------------------------------ SECTION 5: FIRST AID MEASURES ------------------------------------------------------------------------ Instructions for Ingestion Do not induce vomiting. Get immediate medical attention. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Instructions for Eye Contact Get immediate medical attention. Immediately flush eyes with large amounts of water for at least 15 minutes. Instructions for Skin Contact Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical attention. Wash contaminated clothing and clean shoes before reuse. Instructions for Inhalation Remove person to fresh air. If signs/symptoms develop, get medical attention. ------------------------------------------------------------------------ SECTION 6: FIRE FIGHTING MEASURES ------------------------------------------------------------------------ Suitable Extinguishing Media Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide). Fire Fighting Procedures Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture. Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). Exposure Hazards during Fire Closed containers exposed to heat from fire may build pressure and explode. Vapors may travel long distances along the ground or floor to an ignition source and flash back. ------------------------------------------------------------------------ SECTION 7: ACCIDENTAL RELEASE MEASURE ------------------------------------------------------------------------ Spill Response For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Contain spill. Collect as much of the spilled material as possible. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and MSDS. Collect the resulting residue containing solution. Place in a closed container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible. Methods for Disposal Not applicable. Special Instructions, Accidental Release Cloth or paper contaminated with adhesive should be disposed of in a m etal container, covered with water and container sealed. ------------------------------------------------------------------------ SECTION 8: HANDLING AND STORAGE ------------------------------------------------------------------------ Incompatible Materials Store away from acids. Store away from heat. Store out of direct sunlight. Store away from oxidizing agents. Explosion Prevention Keep away from heat, sparks, open flame, pilot lights and other sources of ignition. Combustible liquid and vapor. Use Instructions For industrial or professional use only. Avoid contact with oxidizing agents. ------------------------------------------------------------------------ SECTION 9: EXP0SURE CONTROL AND PERSONAL PROTECTION ------------------------------------------------------------------------ AMORPHOUS SILICA (7631-86-9) Exposure Limits 3 mg/m3 CMRG: TWA - specific form; as respirable dust; DUPONT MSDS DATED 11/16 /99 FOR 11-0001-3049-9. Recommended Ventilation Use with appropriate local exhaust ventilation. Provide appropriate local exhaust for cutting, grinding, sanding or machining. Do not use in a confined area or areas with little or no air movement. Eye Protection Avoid eye contact with vapors, mists, or spray. The following should be worn alone or in combination, as appropriate, to prevent eye contact: Safety glasses with side shields Hand Protection The following glove material(s) are recommended: butyl rubber nitrile rubber polyethylene polyvinyl alcohol Skin Protection Avoid skin contact. Respiratory Protection Avoid breathing of vapors, mists or spray. Avoid breathing of dust created by cutting, sanding, grinding or machining. Do not breathe vapors. Select one of the following approved respirators based on airborne concentration of contaminants and in accordance with regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges Ingestion Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Special Information, Exposure/Protection When equalizing plungers, prior to use, dispense unmixed adhesive onto a clean, solvent-free, non-porous surface such as aluminum foil, glas s or a metal can. Do not dispense unmixed adhesive onto paper or cloth towels or rags. ------------------------------------------------------------------------ SECTION 10: STABILITY AND REACTIVITY ------------------------------------------------------------------------ Materials to Avoid Strong Acids Heat Hazardous Decomposition Aldehydes During Combustion Amine Compounds During Combustion Carbon monoxide During Combustion Carbon dioxide During Combustion Oxides of Nitrogen During Combustion Toxic Vapor, Gas, Particulate During Combustion Stability and Reactivity Hazardous polymerization will not occur. Stable ------------------------------------------------------------------------ SECTION 11: TOXICOLOGICAL INFORMATION ------------------------------------------------------------------------ Effects from Eye Contact Corrosive (Eye Burns): Signs/symptoms may include cloudy appearance of the cornea, chemical burns, severe pain, tearing, ulcerations, significantly impaired vision or complete loss of vision. Effects from Skin Contact May be absorbed through skin and cause target organ effects. Severe Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, dryness, cracking, blistering, and pain. Prolonged or repeated exposure may cause: Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Effects from Inhalation May be absorbed following inhalation and cause target organ effects. Upper Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Prolonged or repeated exposure may cause: Allergic Respiratory Reaction: Signs/symptoms may include difficulty breathing, wheezing, cough, and tightness of chest. Effects from Ingestion May be absorbed following ingestion and cause target organ effects. Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting. Other Toxicological Information Prolonged or repeated exposure may cause: Liver Effects: Signs/symptoms may include loss of appetite, weight loss, fatigue, weakness, abdominal tenderness and jaundice. Kidney Effects: Signs/symptoms may include reduced or absent urine production, increased serum creatinine, lower back pain, increased protein in urine, and increased blood urea nitrogen (BUN). ------------------------------------------------------------------------ SECTION 12: ECOLOGICAL INFORMATION ------------------------------------------------------------------------ Environmental Data No data available. Ecotoxicity Data Not determined. Ecofate Data Not determined. ------------------------------------------------------------------------ SECTION 13: DISPOSAL INFORMATION ------------------------------------------------------------------------ Product as Sold Cure (harden, set, or react) the product according to product instructions. Dispose of completely cured (or polymerized) wastes in a sanitary landfill. As a disposal alternative, incinerate uncured product in an industrial or commercial incinerator. ------------------------------------------------------------------------ SECTION 14: TRANSPORT INFORMATION ------------------------------------------------------------------------ UN Number IMO Class ICAO Class ------------------------------------------------------------------------ SECTION 15: REGULATORY INFORMATION ------------------------------------------------------------------------ Symbols None Risk Phrases None Safety Phrases None Special Regulatory Information Contact 3M for more information. ------------------------------------------------------------------------ SECTION 16: OTHER INFORMATION ------------------------------------------------------------------------ Reason for Reissue Complete document review with multiple sections updated. The information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. Any use of the product which is not in conformance with this data sheet or which involves using the product in combination with any other product or any other process is the responsibility of the user. 3M MALAYSIA SDN BHD ======================================================================== CHEMICAL SAFETY DATA SHEET ======================================================================== Document id : 08-8286-0 Issue date : 30/05/2006 Version : 2.00 Supersedes date : 09/11/2004 Document status : Issued This CSDS has been prepared by Toxicology Department 3M Malaysia Sdn. Bhd. ------------------------------------------------------------------------ SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION ------------------------------------------------------------------------ Tradename SCOTCH-WELD(TM) STRUCTURAL PLASTIC ADHESIVE DP-8005 (PART B) 3M Product ID: 62-2786-8530-0, 62-2786-8535-9, 62-2786-9530-9 Intended Use of Product COMPANY IDENTIFICATION ---------------------- Manufacturer's name and address 3M 3M Center St. Paul, Minnesota 55144-1000 USA Importer's name and address 3M Malaysia Sdn. Bhd. Bangunan 3M No. 6, Persiaran Tropicana 47410 Petaling Jaya Selangor Telephone number 03-7806-2888 Emergency telephone number 1-651-7376501 ( 24 hours ) CONTACT POINT ------------- Designation Toxicology Coordinator Telephone number 03-7806-2888 ------------------------------------------------------------------------ SECTION 2: COMPOSITION/INFORMATION ON INGREDIENT ------------------------------------------------------------------------ Ingredient name CAS number Percentage ------------------------------------- ------------------ ------------- methacrylate 2455-24-5 40 - 60 ACRYLONITRILE-BUTADIENE-STYRENE RESIN 9003-56-9 10 - 30 2-ETHYLHEXYL METHACRYLATE 688-84-6 10 - 30 microspheres 66402-68-4 1 - 5 impact modifier 20882-04-6 1 - 3 QUARTZ SILICA 14808-60-7 < 0.5 ------------------------------------------------------------------------ SECTION 3: PHYSICAL AND CHEMICAL PROPERTIES ------------------------------------------------------------------------ Physical form,Color,Odor Liquid Translucent, mild acrylic odor Paste Water Solubility <<< Boiling point/boiling range >= 35 C Melting point/melting range N/A Vapour pressure <= 0.1 mmHg CONDITIONS: @ 20 C Percent Volatile = 39.86 % by wt ASTM CONDITIONS: D2369 @ 110 C Evaporation rate NOT DETERMINED Vapour density NOT DETERMINED Specific gravity = 0.984 Flash point = 103.33 C Setaflash SPECIFIC METHOD: ASTM D-3278-96 Autoflammability NOT DETERMINED Flammable Limits - LEL NOT DETERMINED Flammable Limits - UEL NOT DETERMINED Viscosity = 25000 centipoise ------------------------------------------------------------------------ SECTION 4: HAZARD IDENTIFICATION ------------------------------------------------------------------------ Risk Phrases None ------------------------------------------------------------------------ SECTION 5: FIRST AID MEASURES ------------------------------------------------------------------------ Instructions for Ingestion Do not induce vomiting. Get immediate medical attention. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Instructions for Eye Contact Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Instructions for Skin Contact Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical attention. Wash contaminated clothing and clean shoes before reuse. Instructions for Inhalation Remove person to fresh air. If signs/symptoms develop, get medical attention. ------------------------------------------------------------------------ SECTION 6: FIRE FIGHTING MEASURES ------------------------------------------------------------------------ Suitable Extinguishing Media Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam). Fire Fighting Procedures Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). Special Instructions for Fire Fighting Not applicable. ------------------------------------------------------------------------ SECTION 7: ACCIDENTAL RELEASE MEASURE ------------------------------------------------------------------------ Spill Response For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Contain spill. Collect as much of the spilled material as possible. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and MSDS. Collect the resulting residue containing solution. Place in a closed container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible. Methods for Disposal Not applicable. Special Instructions, Accidental Release Cloth or paper contaminated with adhesive should be disposed of in a m etal container, covered with water and container sealed. ------------------------------------------------------------------------ SECTION 8: HANDLING AND STORAGE ------------------------------------------------------------------------ Incompatible Materials Store away from acids. Store away from heat. Store out of direct sunlight. Use Instructions For industrial or professional use only. ------------------------------------------------------------------------ SECTION 9: EXP0SURE CONTROL AND PERSONAL PROTECTION ------------------------------------------------------------------------ QUARTZ SILICA (14808-60-7) Exposure Limits 0.05 mg/m3 ACGIH: TWA - respirable; Table A2; CHEMICAL SUBSTANCE TLVS ADOPTED FOR 2000. Recommended Ventilation Use with appropriate local exhaust ventilation. Provide ventilated enclosure for heat curing. Provide appropriate local exhaust for cutting, grinding, sanding or machining. Curing enclosures must be exhausted to outdoors or to a suitable emission control device. Eye Protection Avoid eye contact with vapors, mists, or spray. The following should be worn alone or in combination, as appropriate, to prevent eye contact: Safety glasses with side shields Hand Protection The following glove material(s) are recommended: butyl rubber nitrile rubber polyethylene polyvinyl alcohol Skin Protection Avoid skin contact. Respiratory Protection Avoid breathing of vapors, mists or spray. Avoid breathing of vapors created during the cure cycle. Avoid breathing of dust created by cutting, sanding, grinding or machining. Select one of the following approved respirators based on airborne concentration of contaminants and in accordance with regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges Ingestion Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Special Information, Exposure/Protection When equalizing plungers, prior to use, dispense unmixed adhesive onto a clean, solvent free non-porous surface such as aluminum foil, glass or a metal can. Do not dispense unmixed adhesive onto paper or cloth t owels or rags. ------------------------------------------------------------------------ SECTION 10: STABILITY AND REACTIVITY ------------------------------------------------------------------------ Materials to Avoid Strong Acids Heat Hazardous Decomposition Aldehydes During Combustion Amine Compounds During Combustion Carbon monoxide During Combustion Carbon dioxide During Combustion Oxides of Nitrogen During Combustion Toxic Vapor, Gas, Particulate During Combustion Stability and Reactivity Hazardous polymerization will not occur. Stable ------------------------------------------------------------------------ SECTION 11: TOXICOLOGICAL INFORMATION ------------------------------------------------------------------------ Effects from Eye Contact Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Vapors released during curing may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Effects from Skin Contact Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Prolonged or repeated exposure may cause: Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Effects from Inhalation May be absorbed following inhalation and cause target organ effects. Upper Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Effects from Ingestion May be absorbed following ingestion and cause target organ effects. Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting. Carcinogenicity Contains a chemical or chemicals which can cause cancer. Other Toxicological Information Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness. ------------------------------------------------------------------------ SECTION 12: ECOLOGICAL INFORMATION ------------------------------------------------------------------------ Environmental Data No data available. Ecotoxicity Data Not determined. Ecofate Data Not determined. ------------------------------------------------------------------------ SECTION 13: DISPOSAL INFORMATION ------------------------------------------------------------------------ Product as Sold Cure (harden, set, or react) the product according to product instructions. Dispose of completely cured (or polymerized) wastes in a sanitary landfill. As a disposal alternative, incinerate uncured product in an industrial or commercial incinerator. ------------------------------------------------------------------------ SECTION 14: TRANSPORT INFORMATION ------------------------------------------------------------------------ UN Number IMO Class ICAO Class Special Instructions Not regulated per U.S. DOT, IATA or IMO. ------------------------------------------------------------------------ SECTION 15: REGULATORY INFORMATION ------------------------------------------------------------------------ Symbols None Risk Phrases None Safety Phrases None Special Regulatory Information Contact 3M for more information. ------------------------------------------------------------------------ SECTION 16: OTHER INFORMATION ------------------------------------------------------------------------ Reason for Reissue Added/Deleted stock numbers. Complete document review with multiple sections updated. The information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. Any use of the product which is not in conformance with this data sheet or which involves using the product in combination with any other product or any other process is the responsibility of the user.