3M MALAYSIA SDN BHD
========================================================================
CHEMICAL SAFETY DATA SHEET
========================================================================
Document id : 08-7352-1 Issue date : 30/05/2006
Version : 2.00 Supersedes date : 09/11/2004
Document status : Issued
This CSDS has been prepared by Toxicology Department
3M Malaysia Sdn. Bhd.
------------------------------------------------------------------------
SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
------------------------------------------------------------------------
Tradename
SCOTCH-WELD (TM) EPOXY ADHESIVE DP-420 BLACK (PART A)
3M Product ID: 62-2878-8530-5, 62-2878-9530-4
Intended Use of Product
COMPANY IDENTIFICATION
----------------------
Manufacturer's name and address 3M
3M Center
St. Paul, Minnesota 55144-1000
USA
Importer's name and address 3M Malaysia Sdn. Bhd.
Bangunan 3M
No. 6, Persiaran Tropicana
47410 Petaling Jaya
Selangor
Telephone number 03-7806-2888
Emergency telephone number 1-651-7376501 ( 24 hours )
CONTACT POINT
-------------
Designation Toxicology Coordinator
Telephone number 03-7806-2888
------------------------------------------------------------------------
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENT
------------------------------------------------------------------------
Ingredient name CAS number Percentage
------------------------------------- ------------------ -------------
4,7,10-TRIOXATRIDECANE-1,13-DIAMINE 4246-51-9 50.0 - 60.0
MODIFIED DIGLYCIDYL ETHER OF Trade Secret 20.0 - 30.0
BISPHENOL A - N.J. TRADE SECRET (T.S.
) REGISTRY #04499600-5023P
EPOXY RESIN 25068-38-6 5.0 - 10.0
AMORPHOUS SILICA 7631-86-9 3.0 - 7.0
2,4,6-TRIS((DIMETHYLAMINO)METHYL)) 90-72-2 3.0 - 7.0
PHENOL
SULFONIC ACID SALT - N.J. TRADE Trade Secret 1.0 - 5.0
SECRET (T.S.) REGISTRY #04499600-
5022P
------------------------------------------------------------------------
SECTION 3: PHYSICAL AND CHEMICAL PROPERTIES
------------------------------------------------------------------------
Physical form,Color,Odor viscous liquid amber, very
mild pungent odor.
Water Solubility <<<
Boiling point/boiling range N/A
Melting point/melting range NOT DETERMINED
Vapour pressure N/A
Percent Volatile
No data available.
Evaporation rate N/A
Vapour density = 3.72 Air=1
Specific gravity = 1.120 Water=1
Flash point > 90.0 C TCC
Autoflammability NOT DETERMINED
Flammable Limits - LEL N/A
Flammable Limits - UEL N/A
Viscosity = 8000.0 centipoise
------------------------------------------------------------------------
SECTION 4: HAZARD IDENTIFICATION
------------------------------------------------------------------------
Risk Phrases
None
------------------------------------------------------------------------
SECTION 5: FIRST AID MEASURES
------------------------------------------------------------------------
Instructions for Ingestion
Do not induce vomiting. Drink two glasses of water. Call a
physician.
Instructions for Eye Contact
Immediately flush eyes with large amounts of water for at least
15 minutes. Get immediate medical attention.
Instructions for Skin Contact
Immediately flush skin with large amounts of water for at least
15 minutes in a chemical safety shower while removing
contaminated clothing and shoes. Get immediate medical attention.
Wash contaminated clothing before reuse.
Instructions for Inhalation
If signs/symptoms occur, remove person to fresh air. If
signs/symptoms continue, call a physician.
------------------------------------------------------------------------
SECTION 6: FIRE FIGHTING MEASURES
------------------------------------------------------------------------
Suitable Extinguishing Media
Water Carbon dioxide Dry chemical Foam
Fire Fighting Procedures
Wear full protective clothing, including helmet, self-contained,
positive pressure or pressure demand breathing apparatus, bunker
coat and pants, bands around arms, waist and legs, face mask, and
protective covering for exposed areas of the head.
Special Instructions for Fire Fighting
None known.
------------------------------------------------------------------------
SECTION 7: ACCIDENTAL RELEASE MEASURE
------------------------------------------------------------------------
Spill Response
Cover with absorbent material. Collect as much of the spilled
material as possible. Place in a U.S. DOT-approved container.
Methods for Disposal
Cure (harden, set, or react) the product according to product
instructions. As a disposal alternative, incinerate uncured
product in an industrial or commercial incinerator. Dispose of
completely cured (or polymerized) wastes in a sanitary landfill.
------------------------------------------------------------------------
SECTION 8: HANDLING AND STORAGE
------------------------------------------------------------------------
Incompatible Materials
Store away from heat.
Use Instructions
Keep container tightly closed.
------------------------------------------------------------------------
SECTION 9: EXP0SURE CONTROL AND PERSONAL PROTECTION
------------------------------------------------------------------------
AMORPHOUS SILICA (7631-86-9)
Exposure Limits 3 mg/m3 CMRG: TWA - specific
form; as respirable dust;
DUPONT MSDS DATED 11/16
/99 FOR 11-0001-3049-9.
2,4,6-TRIS((DIMETHYLAMINO)METHYL))PHENOL (90-72-2)
Exposure Limits 5 ppm CMRG: TWA; CMRG
AUTHORITY: ALSO ROHM & HAAS
Recommended Ventilation
Provide appropriate local exhaust for cutting, grinding, sanding
or machining. Curing enclosures must be exhausted to outdoors or
to a suitable emission control device. Use in a well-ventilated
area. If exhaust ventilation is not adequate, use appropriate
respiratory protection.
Eye Protection
Avoid eye contact. Indirect Vented Goggles Safety glasses with
side shields
Hand Protection
Wear appropriate gloves when handling this material. The
following glove material(s) are recommended:
polyethylene/ethylene vinyl alcohol
Skin Protection
Avoid skin contact.
Respiratory Protection
Avoid breathing of vapors. Avoid breathing of dust created by
cutting, sanding, grinding or machining. Select one of the
following approved respirators based on airborne concentration of
contaminants and in accordance with regulations: half-mask dust
respirator
Ingestion
Do not eat, drink or smoke when using this product. Wash exposed
areas thoroughly with soap and water. Do not ingest. Keep out of
the reach of children.
------------------------------------------------------------------------
SECTION 10: STABILITY AND REACTIVITY
------------------------------------------------------------------------
Materials to Avoid
Heat is generated during cure. Do not cure a mass larger than 50
grams in a confined space to prevent a premature reaction
(exotherm) with production of intense heat and smoke.
Hazardous Decomposition
Carbon Monoxide and Carbon Dioxide Oxides of Nitrogen Amine
Compounds Toxic Vapors, Gases or Particulates
Stability and Reactivity
Stable Hazardous polymerization will not occur.
------------------------------------------------------------------------
SECTION 11: TOXICOLOGICAL INFORMATION
------------------------------------------------------------------------
Effects from Eye Contact
Corrosive (Eye Burns): Signs/symptoms may include cloudy
appearance of the cornea, chemical burns, severe pain, tearing,
ulcerations, significantly impaired vision or complete loss of
vision. Vapors from heated material may cause eye irritation.
Signs/symptoms may include redness, swelling, pain, tearing, and
blurred or hazy vision. Dust created by cutting, grinding,
sanding, or machining may cause eye irritation. Signs/symptoms
may include redness, swelling, pain, tearing, and blurred or hazy
vision.
Effects from Skin Contact
Allergic Skin Reaction (non-photo induced): Signs/symptoms may
include redness, swelling, blistering, and itching. Corrosive
(Skin Burns): Signs/symptoms may include localized redness,
swelling, itching, intense pain, blistering, ulceration, and
tissue destruction. May be absorbed through the skin and produce
effects similiar to those caused by inhalation and/or ingestion.
Effects from Inhalation
Upper Respiratory Tract Irritation: Signs/symptoms may include
cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain. Vapors from heated material may cause irritation
of the respiratory system. Signs/symptoms may include cough,
sneezing, nasal discharge, headache, hoarseness, and nose and
throat pain. Dust from cutting, grinding, sanding or machining
may cause irritation of the respiratory system. Signs/symptoms
may include cough, sneezing, nasal discharge, headache,
hoarseness, and nose and throat pain.
Effects from Ingestion
Ingestion may cause: Gastrointestinal Irritation: Signs/symptoms
may include abdominal pain, nausea, diarrhea and vomiting.
Other Toxicological Information
Exposure to this material in normal storage and handling has not
been reported to cause significant adverse health effects.
However, under normal processing conditions, e.g. grinding or
heating, this product may release fumes and vapors of variable
composition based on specific process conditions. These process
releases may produce irritation or any of the health effects
listed above when the emissions are present at elevated
concentrations. Use with appropriate local exhaust ventilation.
------------------------------------------------------------------------
SECTION 12: ECOLOGICAL INFORMATION
------------------------------------------------------------------------
Environmental Data
No data available.
Other Ecotoxicity Information
Not determined. Since regulations vary, consult applicable
regulations or authorities before disposal.
------------------------------------------------------------------------
SECTION 13: DISPOSAL INFORMATION
------------------------------------------------------------------------
Product as Sold
------------------------------------------------------------------------
SECTION 14: TRANSPORT INFORMATION
------------------------------------------------------------------------
UN Number
IMO Class
ICAO Class
------------------------------------------------------------------------
SECTION 15: REGULATORY INFORMATION
------------------------------------------------------------------------
Symbols
None
Risk Phrases
None
Safety Phrases
None
------------------------------------------------------------------------
SECTION 16: OTHER INFORMATION
------------------------------------------------------------------------
Reason for Reissue
Division name change.
The information on this data sheet represents our current data and
best opinion as to the proper use in handling of this product under
normal conditions. Any use of the product which is not in conformance
with this data sheet or which involves using the product in
combination with any other product or any other process is the
responsibility of the user.