3M MALAYSIA SDN BHD ======================================================================== CHEMICAL SAFETY DATA SHEET ======================================================================== Document id : 22-2398-0 Issue date : 02/05/2007 Version : 1.00 Supersedes date : --- Document status : Issued This CSDS has been prepared by Toxicology Department 3M Malaysia Sdn. Bhd. ------------------------------------------------------------------------ SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION ------------------------------------------------------------------------ Tradename 3M RE35 & RE70 Automotive Films 3M Product ID: 70-0063-4923-0, 70-0063-4925-5 Intended Use of Product Automotive Window Film. COMPANY IDENTIFICATION ---------------------- Manufacturer's name and address 3M 3M Center St. Paul, Minnesota 55144-1000 USA Importer's name and address 3M Malaysia Sdn. Bhd. Bangunan 3M No. 6, Persiaran Tropicana 47410 Petaling Jaya Selangor Telephone number 03-7806-2888 Emergency telephone number 1-651-7376501 ( 24 hours ) CONTACT POINT ------------- Designation Toxicology Coordinator Telephone number 03-7806-2888 ------------------------------------------------------------------------ SECTION 2: COMPOSITION/INFORMATION ON INGREDIENT ------------------------------------------------------------------------ Ingredient name CAS number Percentage ------------------------------------- ------------------ ------------- Multilayer Metalized PET Film Trade Secret 50 - 70 Silicon Treated PET Liner Mixture 35 - 45 Adhesives Mixture 1 - 3 Coatings Unknown 0.1 - 1 ------------------------------------------------------------------------ SECTION 3: PHYSICAL AND CHEMICAL PROPERTIES ------------------------------------------------------------------------ Physical form,Color,Odor Solid Blue colored window film. Water Solubility N/A % Boiling point/boiling range N/A C Melting point/melting range = 255 C Vapour pressure N/A mmHg Percent Volatile No data available. Evaporation rate No data available. Vapour density Not applicable. Specific gravity = 1.4 Flash point N/A C Autoflammability N/A Flammable Limits - LEL N/A % Flammable Limits - UEL N/A % Viscosity No data available. ------------------------------------------------------------------------ SECTION 4: HAZARD IDENTIFICATION ------------------------------------------------------------------------ Risk Phrases None ------------------------------------------------------------------------ SECTION 5: FIRST AID MEASURES ------------------------------------------------------------------------ Instructions for Ingestion No need for first aid is anticipated. Instructions for Eye Contact No need for first aid is anticipated. Instructions for Skin Contact No need for first aid is anticipated. Instructions for Inhalation No need for first aid is anticipated. ------------------------------------------------------------------------ SECTION 6: FIRE FIGHTING MEASURES ------------------------------------------------------------------------ Suitable Extinguishing Media Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide). Fire Fighting Procedures Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). Exposure Hazards during Fire No unusual fire or explosion hazards are anticipated. ------------------------------------------------------------------------ SECTION 7: ACCIDENTAL RELEASE MEASURE ------------------------------------------------------------------------ Spill Response Not applicable. Methods for Disposal Not applicable. ------------------------------------------------------------------------ SECTION 8: HANDLING AND STORAGE ------------------------------------------------------------------------ Use Instructions Avoid breathing of dust created by cutting, sanding, grinding or machining. This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical under normal use conditions. ------------------------------------------------------------------------ SECTION 9: EXP0SURE CONTROL AND PERSONAL PROTECTION ------------------------------------------------------------------------ Recommended Ventilation Provide appropriate local exhaust for cutting, grinding, sanding or machining. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control dust, fume, or airborne particles. If ventilation is not adequate, use respiratory protection equipment. Eye Protection The following should be worn alone or in combination, as appropriate, to prevent eye contact: Safety glasses with side shields Hand Protection Gloves are not required. Skin Protection Not applicable. Respiratory Protection Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection. Avoid breathing of dust created by cutting, sanding, grinding or machining. Ingestion Not applicable. ------------------------------------------------------------------------ SECTION 10: STABILITY AND REACTIVITY ------------------------------------------------------------------------ Materials to Avoid Sparks and/or Flames Hazardous Decomposition Carbon monoxide During Combustion Carbon dioxide During Combustion Aldehydes At Elevated Temperatures Under recommended usage conditions, hazardous decomposition products are not expected. Hazardous decomposition products may occur as a result of oxidation, heating, or reaction with another material. Stability and Reactivity Hazardous polymerization will not occur. Stable ------------------------------------------------------------------------ SECTION 11: TOXICOLOGICAL INFORMATION ------------------------------------------------------------------------ Effects from Eye Contact No health effects are expected. Effects from Skin Contact No health effects are expected. Effects from Inhalation No health effects are expected. Effects from Ingestion No health effects are expected. Other Toxicological Information This product, when used under reasonable conditions and in accordance with the 3M directions for use, should not present a health hazard. However, use or processing of the product in a manner not in accordance with the product's directions for use may affect the performance of the product and may present potential health and safety hazards. ------------------------------------------------------------------------ SECTION 12: ECOLOGICAL INFORMATION ------------------------------------------------------------------------ Environmental Data No data available. Ecotoxicity Data Not applicable. Ecofate Data Not applicable. ------------------------------------------------------------------------ SECTION 13: DISPOSAL INFORMATION ------------------------------------------------------------------------ Product as Sold Dispose of waste product in a sanitary landfill. As a disposal alternative, incinerate in an industrial or commercial facility in the presence of a combustible material. ------------------------------------------------------------------------ SECTION 14: TRANSPORT INFORMATION ------------------------------------------------------------------------ UN Number IMO Class ICAO Class Special Instructions ** NOT HAZARDOUS FOR TRANSPORT FOR DOT, IMO OR IATA. ------------------------------------------------------------------------ SECTION 15: REGULATORY INFORMATION ------------------------------------------------------------------------ Symbols None Risk Phrases None Safety Phrases None Special Regulatory Information Contact 3M for more information. ------------------------------------------------------------------------ SECTION 16: OTHER INFORMATION ------------------------------------------------------------------------ Reason for Reissue Change in MSDS ingredient disclosure. The information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. Any use of the product which is not in conformance with this data sheet or which involves using the product in combination with any other product or any other process is the responsibility of the user.