3M MALAYSIA SDN BHD ======================================================================== CHEMICAL SAFETY DATA SHEET ======================================================================== Document id : 28-4251-6 Issue date : 19/10/2012 Version : 1.00 Supersedes date : --- Document status : Issued This CSDS has been prepared by Toxicology Department 3M Malaysia Sdn. Bhd. ------------------------------------------------------------------------ SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION ------------------------------------------------------------------------ Tradename 3M(TM) Fire Barrier Duct Wrap 615+ 3M Product ID: 98-0400-5612-3, 98-0400-5613-1 Intended Use of Product Passive Fire Protection COMPANY IDENTIFICATION ---------------------- Manufacturer's name and address 3M 3M Center St. Paul, Minnesota 55144-1000 USA Importer's name and address 3M Malaysia Sdn. Bhd. Bangunan 3M No. 6, Persiaran Tropicana 47410 Petaling Jaya Selangor Telephone number 03-7806-2888 Emergency telephone number 1-651-7376501 ( 24 hours ) CONTACT POINT ------------- Designation Toxicology Coordinator Telephone number 03-7806-2888 ------------------------------------------------------------------------ SECTION 2: COMPOSITION/INFORMATION ON INGREDIENT ------------------------------------------------------------------------ Ingredient name CAS number Percentage ------------------------------------- ------------------ ------------- Synthetic fibers, Ceramic Fiber Mat 329211-92-9 > 95 ------------------------------------------------------------------------ SECTION 3: PHYSICAL AND CHEMICAL PROPERTIES ------------------------------------------------------------------------ Physical form,Color,Odor Solid Grey-green,odorless material with a wool type appearance. Water Solubility <<< Boiling point/boiling range No data available. Melting point/melting range N/A Vapour pressure No data available. Percent Volatile 0 % Evaporation rate No data available. Vapour density Not applicable. Specific gravity 2.5 - 3 Water=1 Flash point N/A Autoflammability N/A Flammable Limits - LEL N/A Flammable Limits - UEL N/A Viscosity No data available. ------------------------------------------------------------------------ SECTION 4: HAZARD IDENTIFICATION ------------------------------------------------------------------------ Risk Phrases None ------------------------------------------------------------------------ SECTION 5: FIRST AID MEASURES ------------------------------------------------------------------------ Instructions for Ingestion No need for first aid is anticipated. Instructions for Eye Contact Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Instructions for Skin Contact Wash affected area with soap and water. If signs/symptoms develop, get medical attention. Instructions for Inhalation If signs/symptoms develop, remove person to fresh air. If signs/symptoms persist, get medical attention. ------------------------------------------------------------------------ SECTION 6: FIRE FIGHTING MEASURES ------------------------------------------------------------------------ Suitable Extinguishing Media Non-combustible. Choose material suitable for surrounding fire. Fire Fighting Procedures Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). Special Instructions for Fire Fighting Not applicable. ------------------------------------------------------------------------ SECTION 7: ACCIDENTAL RELEASE MEASURE ------------------------------------------------------------------------ Spill Response Not applicable. Methods for Disposal Not applicable. ------------------------------------------------------------------------ SECTION 8: HANDLING AND STORAGE ------------------------------------------------------------------------ Incompatible Materials Store away from acids. Use Instructions Avoid breathing of dust created by cutting, sanding, grinding or machining. ------------------------------------------------------------------------ SECTION 9: EXP0SURE CONTROL AND PERSONAL PROTECTION ------------------------------------------------------------------------ Recommended Ventilation Provide ventilation adequate to control dust concentrations below recommended exposure limits and/or control dust. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control dust, fume, or airborne particles. If ventilation is not adequate, use respiratory protection equipment. Eye Protection Avoid eye contact. The following should be worn alone or in combination, as appropriate, to prevent eye contact: Safety glasses with side shields Indirect Vented Goggles Hand Protection Gloves not normally required. The following glove material(s) are recommended: neoprene nitrile rubber Skin Protection Avoid prolonged or repeated skin contact. Respiratory Protection Avoid breathing of airborne material. Avoid breathing of dust created by cutting, sanding, grinding or machining. Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection. Select one of the following approved respirators based on airborne concentration of contaminants and in accordance with regulations: Half facepiece or full facepiece air-purifying respirator suitable for particulates Ingestion Not applicable. ------------------------------------------------------------------------ SECTION 10: STABILITY AND REACTIVITY ------------------------------------------------------------------------ Conditions to Avoid None known. Materials to Avoid Strong Acids Hazardous Decomposition Carbon Monoxide Carbon Dioxide Stability and Reactivity Hazardous polymerization will not occur. Stable ------------------------------------------------------------------------ SECTION 11: TOXICOLOGICAL INFORMATION ------------------------------------------------------------------------ Effects from Eye Contact Mechanical eye irritation: Signs/symptoms may include pain, redness, tearing and corneal abrasion. Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Effects from Skin Contact Mechanical Skin irritation: Signs/symptoms may include abrasion, redness, pain, and itching. Effects from Inhalation Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Dust from cutting, grinding, sanding or machining may cause target organ effects. Effects from Ingestion No health effects are expected. ------------------------------------------------------------------------ SECTION 12: ECOLOGICAL INFORMATION ------------------------------------------------------------------------ Environmental Data No data available. Ecotoxicity Data Not determined. Ecofate Data Not determined. ------------------------------------------------------------------------ SECTION 13: DISPOSAL INFORMATION ------------------------------------------------------------------------ Product as Sold Dispose of waste product in a sanitary landfill. As a disposal alternative, dispose of waste product in a facility permitted to accept chemical waste. ------------------------------------------------------------------------ SECTION 14: TRANSPORT INFORMATION ------------------------------------------------------------------------ UN Number NOT HAZARDOUS FOR TRANSPORT FOR DOT, IMO, OR IATA. IMO Class NOT HAZARDOUS FOR TRANSPORT FOR DOT, IMO, OR IATA. ICAO Class NOT HAZARDOUS FOR TRANSPORT FOR DOT, IMO, OR IATA. Special Instructions Transportation classifications are provided as a customer service. As for shipping, YOU remain responsible for complying with all applicable laws and regulations, including proper transportation classification and packaging. 3M's transportation classifications are based on product formulation, packaging, 3M policies and 3M's understanding of applicable current regulations. 3M does not guarantee the accuracy of this classification information. This information applies only to transportation classification and not the packaging, labeling or marking requirements. The above information is only for reference. If you are shipping by air or ocean, YOU are advised to check & meet applicable regulatory requirements. ------------------------------------------------------------------------ SECTION 15: REGULATORY INFORMATION ------------------------------------------------------------------------ Symbols None Risk Phrases None Safety Phrases None Special Regulatory Information Contact 3M for more information. ------------------------------------------------------------------------ SECTION 16: OTHER INFORMATION ------------------------------------------------------------------------ The information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. Any use of the product which is not in conformance with this data sheet or which involves using the product in combination with any other product or any other process is the responsibility of the user.