3M MALAYSIA SDN BHD ============================================================================ KIT Chemical Safety Data Sheet ============================================================================ Document id : 10-6069-8 Issue date : 05/10/2006 Version : 2.00 Supersedes date : 14/03/2005 Document status : Issued This CSDS has been prepared by Toxicology Department 3M Malaysia Sdn. Bhd. ---------------------------------------------------------------------------- 1 SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION ---------------------------------------------------------------------------- NOTE ** NOT HAZARDOUS FOR TRANSPORT FOR DOT, IMO, OR IATA. Tradename KIT 5300 (SILICONE LUBRICANT) 3M Product ID: 80-0000-0765-0 - MISCELLANEOUS NON-STD MOTOR LEAD KITS, 80-0080-0640-7 - 5300 MOTOR LEAD PIGTAIN SPLICE, 80-0080-0641-5 - 5301 MOTOR LEAD PIGTAIL SPICE, 80-0080-0642-3 - 5302 MOTOR LEAD PIGTAIL SPLICE, 80-0080-0643-1 - 5303 MOTOR LEAD PIGTAIL SPLICE, 80-0080-0644-9 - 5304 MOTOR LEAD PIGTAIL SPLICE, 80-6101-2327-7, 80-6101-2329-3, 80-6109-7088-3 - 5302 Motor Lead Pigtail Splice KIT COMPONENTS The information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. Any use of the product which is not in conformance with this data sheet or which involves using the product in combination with any other product or any other process is the responsibility of the user. 3M MALAYSIA SDN BHD ======================================================================== CHEMICAL SAFETY DATA SHEET ======================================================================== Document id : 10-2656-6 Issue date : 04/10/2006 Version : 2.00 Supersedes date : 14/03/2005 Document status : Issued This CSDS has been prepared by Toxicology Department 3M Malaysia Sdn. Bhd. ------------------------------------------------------------------------ SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION ------------------------------------------------------------------------ Tradename SILICONE LUBRICANT 3M Product ID: 78-8007-1728-8, FX-XXXX-XXXX-X, 80-6108-3463-4, 80-6109-3893-0 Intended Use of Product COMPANY IDENTIFICATION ---------------------- Manufacturer's name and address 3M 3M Center St. Paul, Minnesota 55144-1000 USA Importer's name and address 3M Malaysia Sdn. Bhd. Bangunan 3M No. 6, Persiaran Tropicana 47410 Petaling Jaya Selangor Telephone number 03-7806-2888 Emergency telephone number 1-651-7376501 ( 24 hours ) CONTACT POINT ------------- Designation Toxicology Coordinator Telephone number 03-7806-2888 ------------------------------------------------------------------------ SECTION 2: COMPOSITION/INFORMATION ON INGREDIENT ------------------------------------------------------------------------ Ingredient name CAS number Percentage ------------------------------------- ------------------ ------------- SILICONE GREASE 63148-62-9 85 - 95 SYNTHETIC AMORPHOUS SILICA, FUMED, 112945-52-5 5 - 15 CRYSTALLINE FREE ------------------------------------------------------------------------ SECTION 3: PHYSICAL AND CHEMICAL PROPERTIES ------------------------------------------------------------------------ Physical form,Color,Odor DETAILS: MITS data: GREASE. Solid Light colored grease, no odor. Water Solubility CONDITIONS: Nil. Boiling point/boiling range N/A Melting point/melting range NOT DETERMINED Vapour pressure N/A Percent Volatile CONDITIONS: 0. Evaporation rate N/A Vapour density N/A Specific gravity 1.02 - 1.6 Water=1 Flash point N/A Autoflammability NOT DETERMINED Flammable Limits - LEL NOT DETERMINED Flammable Limits - UEL NOT DETERMINED Viscosity CONDITIONS: Grease. ------------------------------------------------------------------------ SECTION 4: HAZARD IDENTIFICATION ------------------------------------------------------------------------ Risk Phrases None ------------------------------------------------------------------------ SECTION 5: FIRST AID MEASURES ------------------------------------------------------------------------ Instructions for Ingestion No need for first aid is anticipated. Instructions for Eye Contact Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Instructions for Skin Contact Wash affected area with soap and water. If signs/symptoms develop, get medical attention. Instructions for Inhalation No need for first aid is anticipated. ------------------------------------------------------------------------ SECTION 6: FIRE FIGHTING MEASURES ------------------------------------------------------------------------ Suitable Extinguishing Media Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam). Fire Fighting Procedures Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). Special Instructions for Fire Fighting Not applicable. Exposure Hazards during Fire No unusual fire or explosion hazards are anticipated. Non-flammable: ordinary combustible material. ------------------------------------------------------------------------ SECTION 7: ACCIDENTAL RELEASE MEASURE ------------------------------------------------------------------------ Spill Response Collect as much of the spilled material as possible. Clean up residue with an appropriate organic solvent. Read and follow safety precautions on the solvent label and MSDS. Place in a closed container approved for transportation by appropriate authorities. Methods for Disposal Not applicable. ------------------------------------------------------------------------ SECTION 8: HANDLING AND STORAGE ------------------------------------------------------------------------ Incompatible Materials Store away from acids. Store away from oxidizing agents. Explosion Prevention Do not mix with oxidizers to avoid risk of explosion. Use Instructions For industrial use only. Not intended for use as a medical device or drug. Avoid contact with oxidizing agents. ------------------------------------------------------------------------ SECTION 9: EXP0SURE CONTROL AND PERSONAL PROTECTION ------------------------------------------------------------------------ Recommended Ventilation Not applicable. Provide appropriate local exhaust when product is heated. Eye Protection Avoid eye contact with vapors, mists, or spray. The following should be worn alone or in combination, as appropriate, to prevent eye contact: Safety glasses with side shields Hand Protection Gloves are not required. Skin Protection Not applicable. Respiratory Protection Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection. Ingestion Not applicable. ------------------------------------------------------------------------ SECTION 10: STABILITY AND REACTIVITY ------------------------------------------------------------------------ Materials to Avoid Strong Oxidizing Agents Strong Acids Strong Bases Reducing Agents Hazardous Decomposition Carbon monoxide During Combustion Carbon dioxide During Combustion Formaldehyde with Oxidative Degradation Stability and Reactivity Hazardous polymerization will not occur. Stable ------------------------------------------------------------------------ SECTION 11: TOXICOLOGICAL INFORMATION ------------------------------------------------------------------------ Effects from Eye Contact Mild Eye Irritation: Signs/symptoms may include redness, pain, and tearing. Effects from Skin Contact Contact with the skin during product use is not expected to result in significant irritation. Effects from Inhalation No health effects are expected. Effects from Ingestion No health effects are expected. ------------------------------------------------------------------------ SECTION 12: ECOLOGICAL INFORMATION ------------------------------------------------------------------------ Environmental Data No data available. Ecotoxicity Data Not determined. Ecofate Data Not determined. Special statements for 2001/58/EC A conservative assessment indicates this product presents a low environmental risk because use and disposal are unlikely to result in the significant release of components to the environment. ------------------------------------------------------------------------ SECTION 13: DISPOSAL INFORMATION ------------------------------------------------------------------------ Product as Sold Dispose of completely absorbed waste product in a sanitary landfill. As a disposal alternative, Incinerate in an industrial or commercial facility in the presence of a combustible material. ------------------------------------------------------------------------ SECTION 14: TRANSPORT INFORMATION ------------------------------------------------------------------------ UN Number IMO Class ICAO Class Special Instructions ** NOT HAZARDOUS FOR TRANSPORT FOR DOT, IMO, OR IATA. ------------------------------------------------------------------------ SECTION 15: REGULATORY INFORMATION ------------------------------------------------------------------------ Symbols None Risk Phrases None Safety Phrases S24/25 Avoid contact with the skin and eyes. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of soap and water. Special Regulatory Information Contact 3M for more information. ------------------------------------------------------------------------ SECTION 16: OTHER INFORMATION ------------------------------------------------------------------------ Reason for Reissue The MSDS has been revised because 3M has adopted the 16-section ANSI/ISO format. The potential hazards of the product have not changed. We encourage you to reread the MSDS and review the information. The information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. Any use of the product which is not in conformance with this data sheet or which involves using the product in combination with any other product or any other process is the responsibility of the user.