3MTM Prespace Tape SCPS-55 is high-tack transfer tape used to prespace markings applied to complex surfaces that will be kiss cut, electronically cut or die-cut. With the use of this tape, the time-consuming layout of individual elements on the application surface is eliminated.

Compatible Products

Refer to Instruction Bulletin 4.3 for complete details

*Exception: 3MTM ScotchcalTM ElectroCutTM Film Series 7725 SE and films with exposed liners

Handling & Storage

Unprocessed application tape has a shelf life of one year. It should be stored in a clean, dry area, out of direct sunlight, and suspended horizontally from the core.

Graphics with application tape must be applied within one year from the date of its processing and stored in a cool, dry place. Film and sheeting may be stored flat or wrapped onto cores with a minimum diameter of 6 inches (15 cm). Wrap so the side of the film with the application tape faces out.

After applying application tape, avoid exposing the graphic to sunlight except during application. Sunlight, or UV light, can cause the tape to permanently bond to the film or sheeting.

For More Information

For more specific product information, please refer to Instruction Bulletin 4.3.