3MTM ScotchcalTM ElectroCutTM Film Series 7125

Use this durable opaque film to create electronically cut graphics for nearly any commercial or industrial application. This film is best suited for making emblems, vehicle graphics, labels, striping, general signage and two-way window markings.

When used with compatible products, produced by one of 3Ms Scotchprint® Graphics Authorized Manufacturers and applied according to written instructions, this film can be used to produce a Scotchprint® Graphic.


Basic Construction Characteristics

Film series 7125:

Application Surfaces & Substrates

Film series 7125 can be used on flat or simple curved surfaces and has an application temperature range from 50 to 90F (10 to 32C).

Compatible Products

Screen print images onto this film using:

3MTM MCSTM Warranty

This product is covered by the 3MTM MCSTM Warranty the most comprehensive warranty in the industry.



Please click on the color table link under "Learn More."

Additional Product Information

Available in rolls, film series 7125 comes in standard 48" or 60" width bulk rolls (minimum length is 250 yards). The recommended minimum cutting height for text is 0.375 inch (9.5 mm).

Handling & Storage

Unprocessed film has a shelf life of two years; processed film has a shelf life of one year. It should be stored in a clean, dry area, out of direct sunlight and at a temperature less than 100F (38C).

For More Information

For more specific product information, please refer to Product Bulletin 7125.