3MTM ScotchcalTM ElectroCutTM Film Series 5725
Use this durable opaque film to create pre-spaced, electronically cut graphics for nearly any commercial or industrial application. It is ideally suited for making emblems, vehicle graphics, labels, striping, general signage and two-way window markings.
When used with compatible products, produced by one of 3M’s Scotchprint® Graphics Authorized Manufacturers and applied according to written instructions, this film can be used to produce a Scotchprint® Graphic.
Film series 5725 features 3M’s patented E-film construction, offering the following benefits for medium-term, interior or exterior applications:
Basic Construction Characteristics
Film series 5725:
Application Surfaces & Substrates
Film series 5725 can be used on flat or simple curved surfaces, with and without rivets. Appropriate substrates include automotive paints, glass and acrylic. It has an application temperature range of 50º to 90ºF (10º to 32ºC).
This film is printable using selected 3M inks, overlaminates and overprint clears.
3MTM MCSTM Warranty
This product is covered by the 3MTM MCSTM Warranty – the most comprehensive warranty in the industry.
Please click on the color table link under "Learn More."
Additional Product Information
Available in rolls, film series 5725 comes in punched 15" and 30"widths and unpunched 15", 24", 30" and 48" widths. The minimum recommended cutting height for letters is 0.375 inch (10 mm).
Handling & Storage
Unprocessed film has a shelf life of two years; processed film has a shelf life of one year. It should be stored in a clean, dry area, out of direct sunlight and at a temperature less than 100º F (38º C).
For More Information
For more specific product information, please refer to Product Bulletin 5725.