Use this overlaminate to provide an extra layer of protection and/or enhance the gloss of an electrostatically imaged graphic both indoors and out. It also can be used to laminate selected Piezo Ink Jet graphics.

When used with compatible products, produced by one of 3Ms Scotchprint® Graphics Authorized Manufacturers and applied according to written instructions, this film can be used to produce a Scotchprint® Graphic.


Basic Construction Characteristics

Overlaminate 8910 (ES):

Application Surfaces

This film can be used on flat, riveted and corrugated surfaces. It should be applied at room temperature.

Compatible Products

Overlaminate 8910 can be used to laminate:

3MTM MCSTM Warranty

This product is covered by the 3MTM MCSTM Warranty the most comprehensive warranty in the industry.

Additional Product Information

Overlaminate 8910 (ES) is available in 36", 49.5" and 54" wide by 50-yard long rolls and 54" wide x 100-yard long rolls.

Handling & Storage

Unprocessed film has a shelf life of two years; processed film has a shelf life of one year. It should be stored in a clean, dry area, out of direct sunlight, and at a temperature less than 86F (30C).

For More Information

For more specific product information, please refer to Product Bulletin 8910.