Use this overlaminate to provide an extra layer of protection and/or enhance the gloss of an electrostatically imaged graphic – both indoors and out. It also can be used to laminate selected Piezo Ink Jet graphics.
When used with compatible products, produced by one of 3M’s Scotchprint® Graphics Authorized Manufacturers and applied according to written instructions, this film can be used to produce a Scotchprint® Graphic.
Basic Construction Characteristics
Overlaminate 8910 (ES):
This film can be used on flat, riveted and corrugated surfaces. It should be applied at room temperature.
Overlaminate 8910 can be used to laminate:
3MTM MCSTM Warranty
This product is covered by the 3MTM MCSTM Warranty – the most comprehensive warranty in the industry.
Additional Product Information
Overlaminate 8910 (ES) is available in 36", 49.5" and 54" wide by 50-yard long rolls and 54" wide x 100-yard long rolls.
Handling & Storage
Unprocessed film has a shelf life of two years; processed film has a shelf life of one year. It should be stored in a clean, dry area, out of direct sunlight, and at a temperature less than 86ºF (30ºC).
For More Information
For more specific product information, please refer to Product Bulletin 8910.