Use this clear overlaminate to provide an extra layer of protection and/or enhance the gloss of an electrostatically imaged graphic both indoors and out. It also can be used to laminate selected Piezo Ink Jet graphics.

When used with compatible products, produced by one of 3Ms Scotchprint® Graphics Authorized Manufacturers and applied according to written instructions, this film can be used to produce a Scotchprint® Graphic.

Features

Basic Construction Characteristics

Overlaminate 8908 (ES):

Application Surfaces

This film can be used on flat surfaces with or without rivets, simple curved surfaces and corrugated surfaces. It has a lamination temperature range of 50 to 90F (10 to 32C).

Compatible Products

Overlaminate 8908 (ES) can be used to laminate:

3MTM MCSTM Warranty

This product is covered by the 3MTM MCSTM Warranty the most comprehensive warranty in the industry.

Additional Product Information

Overlaminate 8908 (ES) is available in 35.5", 49" and 53.5" wide by 100-yard long rolls.

Handling & Storage

This overlaminate has a shelf life of two years. It should be stored in a clean, dry area, out of direct sunlight, and at a temperature less than 100F (38C).

For More Information

For more specific product information, please refer to Product Bulletin 8908.