This durable, translucent film can be used on flexible or rigid sign substrates to create window graphics, internally illuminated signs and awnings, and thermoformed sign faces both indoors and out. The films exceptional durability characteristics make it ideal for long-term graphic applications. It has been optimized for use in producing Piezo Ink Jet graphics.

When used with compatible products, produced by one of 3Ms Scotchprint® Graphics Authorized Manufacturers and applied according to written instructions, this film can be used to produce a Scotchprint® Graphic.

Features

Basic Construction Characteristics

Film IJ3630-20:

Application Surfaces & Substrates

Film IJ3630-20 should be applied to flat, smooth surfaces and has a minimum application temperature of 60 F (16 C).

This film is typically used to decorate 3MTM PanaflexTM Awning and Sign Facing Series 945 GPS and 3MTM PanaflexTM Enhanced Image Sign Facing Series 645EI. It also can be used on rigid substrates such as flat acrylic, solar-grade polycarbonate, PETG sheets and glass.

Compatible Products

Image graphics onto this film using:

*Most Piezo Ink Jet graphics do not require overlaminates or overprint clears to be covered by the 3MTM MCSTM warranty.

3MTM MCSTM Warranty

This product is covered by the 3MTM MCSTM Warranty the most comprehensive warranty in the industry.

Additional Product Information

Film IJ3630-20 is available in 54" wide x 50-yard long rolls.

Handling & Storage

This film has a shelf life of two years. It should be stored in a clean, dry area, out of direct sunlight and at a temperature less than 100F (38C).

For More Information

For more specific product information, please refer to Product Bulletin 3630.