Use this durable film to create commercial vehicle or fleet graphics, bus graphics, emblems or striping, point-of-purchase or trade show displays, general signage, vending machine or refrigerator case graphics both indoors and out. This film removes cleanly within two years using only heat. Film 3470 has been approved for use with the Scitex® Pressjet-W Digital Press.

When used with compatible products, produced by one of 3Ms Scotchprint® Graphics Authorized Manufacturers and applied according to written instructions, this film can be used to produce a Scotchprint® Graphic.


Basic Construction Characteristics

Film 3470:

Application Surfaces & Substrates

Film 3470 should be applied to flat surfaces, with or without rivets. Appropriate substrates include glass, metal, stainless steel, paint and rigid plastic. It has an application temperature range of 40 to 100F (4 to 38C).

Compatible Products

Screen print images onto film using:

*Most Piezo Ink Jet graphics do not require overlamination or overprint clears to be covered by the 3MTM MCSTM Warranty.

3MTM MCSTM Warranty

This product is covered by the 3MTM MCSTM Warranty the most comprehensive warranty in the industry.

Additional Product Information

Film 3470 comes in a standard 36" wide x 10/50-yard long rolls.

Handling & Storage

Unprocessed film has a shelf life of two years; it should be stored in a clean, dry area, out of direct sunlight and at a temperature less than 100F (38C).

For More Information

For more specific product information, please refer to Product Bulletin 3470.