Use this durable, positionable vinyl film to create commercial vehicle or fleet markings (including rail cars), emblems, striping, labels and general signage – both indoors and out. Film 180-10 has been approved for use with the Scitex® Pressjet-W Digital Press.
Film180-10 is especially well suited for large graphics because it features 3M’s patented pressure-activated adhesive, making it easier to reposition graphics until firm pressure is applied during installation. The film’s exceptional durability characteristics make it ideal for long-term graphic applications.
When used with compatible products, produced by one of 3M’s Scotchprint® Graphics Authorized Manufacturers and applied according to written instructions, this film can be used to produce a Scotchprint® Graphic.
Basic Construction Characteristics
Application Surfaces & Substrates
Film 180-10 can be used on flat or corrugated surfaces, with and without rivets; simple curves and moderate, compound curves. Appropriate substrates include ABS resins, aluminum, chrome, glass, fiberglass-reinforced plastic and paint.
It has an application temperature range from 40º to 100ºF. (4º to 38ºC) on flat surfaces and 50° to 100°F (10° to 38°C) on corrugated surfaces.
Image graphics onto this film using:
*Most Piezo Ink Jet graphics do not require overlaminates or overprint clears to be covered by the 3MTM MCSTM Warranty.
3MTM MCSTM Warranty
This product is covered by the 3MTM MCSTM Warranty – the most comprehensive warranty in the industry.
Additional Product Information
Film 180-10 is available in standard 24", 36", 48", 60" wide x 50/100-yard long rolls.
Handling & Storage
Unprocessed film has a shelf life of two years; processed film has a shelf life of one year. It should be stored in a clean, dry area, out of direct sunlight and at a temperature less than 100ºF (38ºC).
For More Information
For more specific product information, please refer to Product Bulletin 180.