Use
this overlaminate to protect electrostatically imaged window graphics from
environmental factors such as dust, water and dirt that may collect in
perforated areas. It is used primarily to laminate 3M™ Scotchcal™ Electrostatic
Perforated Window Graphic Film 8671 (ES).
It also can be used as an overlaminate for 3M™ Scotchcal™ Perforated
Window Graphic Film RG8171.
When
used with compatible products, produced by one of 3M’s Scotchprint® Graphics
Authorized Manufacturers and applied according to written instructions, this
film can be used to produce a Scotchprint® Graphic.
·
Overlaminate
8914 (ES) provides an optically clear view through a graphic from the inside of
a building or a vehicle.
Overlaminate
8914 (ES):
·
is
a 2 mil (0.05 mm) optically clear vinyl film; 3 to 4 mil (0.08 to 0.10 mm) with
the adhesive
·
has
an optically clear, pressure sensitive adhesive
·
has
a polyester liner
3M™ MCS™ Warranty
This
product is covered by the 3M™ MCS™ Warranty – the most comprehensive warranty
in the industry.
Additional Product
Information
Overlaminate 8914 (ES) is available in 36”, 49.5” and 54” wide by 50-yard long rolls.
Unprocessed
film has a shelf life of two years; processed film has a shelf life of one
year. It should be stored in a clean, dry area, out of direct sunlight, and at
a temperature less than 86ºF (30º C).
For
more specific product information, please refer to Product Bulletin 8914.