Use this overlaminate to protect electrostatically imaged window graphics from environmental factors such as dust, water and dirt that may collect in perforated areas. It is used primarily to laminate 3M™ Scotchcal™ Electrostatic Perforated Window Graphic Film 8671 (ES). It also can be used as an overlaminate for 3M™ Scotchcal™ Perforated Window Graphic Film RG8171.
When used with compatible products, produced by one of 3M’s Scotchprint® Graphics Authorized Manufacturers and applied according to written instructions, this film can be used to produce a Scotchprint® Graphic.
· Overlaminate 8914 (ES) provides an optically clear view through a graphic from the inside of a building or a vehicle.
Overlaminate 8914 (ES):
· is a 2 mil (0.05 mm) optically clear vinyl film; 3 to 4 mil (0.08 to 0.10 mm) with the adhesive
· has an optically clear, pressure sensitive adhesive
· has a polyester liner
3M™ MCS™ Warranty
This product is covered by the 3M™ MCS™ Warranty – the most comprehensive warranty in the industry.
Additional Product Information
Overlaminate 8914 (ES) is available in 36”, 49.5” and 54” wide by 50-yard long rolls.
Unprocessed film has a shelf life of two years; processed film has a shelf life of one year. It should be stored in a clean, dry area, out of direct sunlight, and at a temperature less than 86ºF (30º C).
For more specific product information, please refer to Product Bulletin 8914.