Use
this durable, positionable vinyl film to create floor graphics in interior
areas exposed to dirt and other environmental factors and wear from high foot
traffic. Film RG162-30 is optimized for
use with the Gretag Arizona™ Digital Screen Press.
Film
RG162-30 features 3M’s patented pressure-activated adhesive, making it easier
to reposition graphics until firm pressure is applied during installation.
When
used with compatible products, produced by one of 3M’s Scotchprint® Graphics
Authorized Manufacturers and applied according to written instructions, this
film can be used to produce a Scotchprint® Graphic.
·
This
film can be applied to most interior floors, including sealed concrete, marble,
terrazzo, ceramic, finished wood.
·
When
used with 3M™ Scotchcal™ Overlaminate Film 3645, final graphic is Underwriter’s
Laboratory (UL) listed as skip resistant.
·
Easily
removable, this film leaves little or no adhesive residue.
Film
RG162-30:
·
is
a 4 mil (0.10 mm) matte white, vinyl film; 4.5 to 5 mil (0.11 to 0.13 mm) with
the adhesive
·
has
a gray adhesive, giving the film increased hiding power
·
has
a 94# polyethylene-coated, paper liner
Film
RG162-30 is specially formulated for use on most interior floors, including
sealed concrete, marble, terrazzo, ceramic, finished wood. It has an application temperature range from
40º to 100ºF (4º to 38ºC).
Image
graphics onto this film using:
·
Gretag
Arizona™ Digital Screen Press
·
3M™
Piezo Ink Jet Ink Series 3700
·
3M™
Scotchcal™ Overlaminate 3645 (required)
3M™ MCS™ Warranty
This product is covered by the 3M™ MCS™ Warranty – the most comprehensive warranty in the industry.
Additional Product
Information
Film RG162-30 comes in a standard 48” wide x 40-yard long rolls..
Unprocessed
film has a shelf life of two years; processed film has a shelf life of one
year. It should be stored in a clean,
dry area, out of direct sunlight and at a temperature less than 100ºF (38ºC).
For
more specific product information, please refer to Product Bulletin RG162-30.